 | HPC 11664A
RF Detector, .01-18 GHz, APC-7 input | $395 | $550 |  |
| HPC 11664E
Coaxial Detector. AC detection mode only, 10 MHz to 26.5 GHz, 3.5 mm)m) connector, +16 to -60 dBm |
| $775 | |
| HPC 11665B
Modulator for 8755, 8756 and 8757 | $350 | $900 | |
| HPC 11666A
Reflectometer Bridge, .04-18 GHz | $950 | $3460 | |
| HPC 35677A
S-Parameter Test Set, 100 KHz-200 MHz, 50 Ohm, Directivity >40 dB, for use with 3577 |
| $4190 | |
| HPC 35678A
Calibration Kit for 3577A, Type-N, 50 Ohm |
| $790 | |
| HPC 35689A
S-Parameter Test Set, 100 KHz-150 MHz, 50 Ohm, for use w/3588A, 3589A Analyzers | $1150 | $3725 | |
| HPC 3575A
Gain Phase Meter, 1 Hz-13 MHz | $795 |
| |
| HPC 3577A
5Hz-200 MHz, High Speed, High Accuracy |
| $28000 | |
| HPC 3577B
Network Analyzer, 5 Hz-200 MHz, High Speed/High Accuracy |
| $22600 | |
| HPC 3708A
Noise & Interference Test Set, provides accurate method of assessing performance of microwave radio & satellite modem systems by providing Carrier to Noise & Carrier to Interference conditions |
| $26150 | |
| HPC 3709B
Consellation Analyzer, to characterize performance of digital radios in service and out of service by analysis of constellation patterns. Also measures distortion of patterns and provides reports | $5900 | $16870 | |
| HPC 41941B
Impedance Probe Kit, 50 ohm, for use with 4194A Impedance Analyzer, 3 meters | $1350 | $2290 | |
| HPC 41952B
Transmission/Reflection Test Set, 75 ohm, 100 KHz-500 MHz, for use with 4195A | $2250 | $3060 | |
| HPC 4195A
Network/Spectrum Analyzer, 10 Hz-500 MHz, High Accuracy, Impedance Analysis, Linear & Nonlinear |
| $32540 | |
| HPC 4395A
10 Hz-500 MHz, Vector Network/Spectrum Analyzer, 0.05 dB dynamic magnitude accuracy, 0.3 degree phase accuracy |
| $26500 | |
| HPC 4396A
Network/Spectrum Analyzer, 100 kHz to 1.8 GHz/2 Hz to 1.8 GHz, full-vector, wide dynamic range, ±0.05 dB/±0.3° dynamic magnitude/phase accuracy, color CRT, built-in disk drive/RAM disk. |
| $30000 | |
| HPC 4396B
RF Network/Spectrum/Impedance Analyzer, 100 kHz to 1.8 GHz, 1 mHz resolution, +/- 0.05 dB/+/-0.3 degrees C dynamic magnitude/phase accuracy, color TFT display, built-in disk drive/RAM disk. |
| $30600 | |
| HPC 4396B/1D5/1D6
RF Network/Spectrum/Impedance Analyzer. Network: 100 kHz to 1.8 GHz, 1 MHz res. Opt. 1D5 = High-Stability Freq. Ref., Opt. 1D6 = Time-Gated Spec. Anal | $18500 | $34000 | |
| HPC 53310A/10/31
Modulation Domain Analyzer, 0-200 MHz, characerization of modulation and jitter, carrier frequency & modulation rate auto displayed, opt 10:High stability time base, opt 31:Digital RF Communications |
| $18690 | |
| HPC 85024A
High frequency Probe, 300 KHz-3 GHz, .7pf shunted by 1 Megohm input capacitance/resistance |
| $2775 | |
| HPC 85025A
Detector, .01-18 GHz, type N male |
| $1150 | |
| HPC 85025B
Series Detector. 10 MHz to 18 GHz, +16 to -55 dBm (ac)/+16 to 50 dBm (dc), 3.5 mm(m) connector |
| $1050 | |
| HPC 85025D
Series Detector, For use with HP 8757 series, ac/dc, 10 MHz to 50 GHz, 2.4 mm (m), dynamic range +16 to –55 dBm (ac), +16 to –50 dBm (dc). |
| $1680 | |
| HPC 85025E
Coaxial Series Detector for HP 8757. 10 MHz to 26.5 GHz. +16 to -55 dBm ac, +16 to -50 dBm dc, 3.5 mm (m) |
| $1360 | |
| HPC 85027A
Directional Bridge, 0.01 to 18 GHz, 50 Ohm |
| $2780 | |
| HPC 85027B
Directional Bridge.10 MHz to 26.5 GHz, 50 Ohm, 3.5 mm(f) input/test port, excellent test port match | $2250 | $3330 | |
| HPC 85027C
10 MHz to 18 GHz. High directivity bridge, excellent test port match. For use with HP 8757 in ac or dc detection modes, or with HP 8756 or 8755 in ac detection mode only. |
| $2725 | |
| HPC 85027D
|
| $4780 | |
| HPC 85027D
Directional Bridge.10 MHz to 50 GHz, 50 Ohms, 2.4mm(f) input, 2.4 mm(m) test port, excellent test port match |
| $4780 | |
| HPC 85027E
Directional Bridge, 0.01 to 26.5 GHz, 3.5 mm (m), 50 Ohms. |
| $3700 | |
| HPC 8502A
Transmission/Reflection Test set, 500 KHz-1.3 GHz | $995 |
| |
| HPC 85032B
50 Ohm Type N calibration kit for 8753 series Network Analyzers, DC-6 GHz |
| $2050 | |
| HPC 85032E
Calibration Kit, 50 Ohm, type-N, DC-6 GHz, contains fixed termination and open/short |
| $685 | |
| HPC 85037B
Precision Detector. 10 MHz to 26.5 GHz, +20 to -55 dBm (ac), +/-0.25 dB, 3.5 mm(m) connector |
| $1940 | |
| HPC 8503A
S-Parameter Test Set, 500 KHz-1.3 GHz | $695 | $7170 | |
| HPC 85046A
S-Parameter Test Set, 300 KHz to 3 GHz, 50 Ohm, for use with 8753A/B/C/D/E Network Analyzers |
|
| |
| HPC 85046B
S-Parameter Test Set, 300 KHz-2 GHz, 75 Ohm, for use with 8753A/B/C/D/E Network Analyzers | $2950 | $9460 | |
| HPC 85051A
Verification Kit, 7mm, for use w/8510A |
| $2750 | |
| HPC 85052C
Calibration Kit, 0.045 to 26.5 GHz,3.5 mm connector, for TRL calibration on HP 8510, including precision airlines. Open and short circuits and fixed terminations |
| $11500 | |
| HPC 85052D
Calibration Kit, 0.045 to 26.5 GHz, 3.5mm connector, contains open and shirt circuits (m and f) and precision fixed terminations (m and f), and in-series adapters |
| $6375 | |
| HPC 85053B
Verification Kit for 3.5 mm, .045-26.5 GHz, for use with 8720 & 8510 series Network Analyzers |
| $4310 | |
| HPC 8505A
Network Analyzer, 500 KHz-1.3 GHz | $2250 | $40370 | |
| HPC 8505A/005
w/Phase Lock | $2950 | $42875 | |
| HPC 85070C
High Temperature Dielectric Probe Kit, 200 MHz to 20 GHz, withstands
-40 degrees to +200 degrees C, hermetic glass-to-metal seal, refresh calibration.
| $3500 | $6040 | |
| HPC 8508A w/85081B
Vector voltmeter. 300 kHz to 2 GHz. RF voltage/phase measurements. 100 kHz to 1 GHz high-impedance probe inputs. |
| $6730 | |
| HPC 8510A
Network Analyzer, 45 MHz-110 GHz, 80-100 dB Dynamic Range |
| $43000 | |
| HPC 8510B
45 MHz-100 GHz, Microwave Vector Network Analyzer, complete system include S-Parameter test Set (not included) & Synthesized sweeper (not included) up to 100 GHz, 80-100 dB dynamic range |
| $34100 | |
| HPC 8511A
Frequency Converter, to 26.5 GHz, used with HP 8510. Four channel magnitude/phase receiver. Add your own power splitters for transmission measurements, bridges for reflection measurements | $3900 | $21500 | |
| HPC 8512A
Reflection/Transmission Test Set for use with 8510A Network Analyzer, .5 to 18 GHz | $4500 | $17300 | |
| HPC 8515A
S-Parameter Test Set, 45 MHz-26.5 GHz, for use w/8510 series Network Analyzers | $7900 | $43000 | |
| HPC 86205A
Bridge Detector, 300 kHz to 6 GHz, 50 Ohms, external directional bridge, high directivity, excellent port match, for 50-Ohm device measurements. | $750 | $1360 | |
| HPC 87075C/12
Multiport Test Set for HP 75-Ohm Network Analyzers. . 300 kHz to 1.3 GHz, 12 ports | $4500 | $16000 | |
| HPC 8711A
RF Network Analyzer, 300 KHz-1300 MHz |
| $13500 | |
| HPC 8711B/1C2
300 kHz to 1300 MHz. Internal 3.5 inch disk drive (LIF/DOS formats). Narrowband and broadband detection. “Real time” 50/ms sweep, optional AM delay. IBASIC capability. |
| $10700 | |
| HPC 8711C
300 KHz-1.3 GHz, Late Model! Includes synthesized source & transmission/reflection test set for complete swept frequency characterization of RF components with single connection HP 35676A |
| $9500 | |
| HPC 8711C/1EC
Network Analyzer. 300 kHz to 1.3 GHz, 1 Hz resolution, <5 ppm accuracy. Option 1EC adds 75-Ohm System Impedance |
| $18500 | |
| HPC 8713B
300 kHz to 3000 MHz. Internal 3.5 inch disk drive (LIF/DOS formats). Narrowband and broadband detection. “Real time” 50/ms sweep, optional AM delay. |
| $14500 | |
| HPC 8714C/1E1
RF Network Analyzer. High Performance. 300 kHz to 3 GHz. 2 independent display channels. Option 1E1 adds 60 dB Attenuator | $8500 | $19000 | |
| HPC 8714ES
Network Analyzer with S-parameter Test Set. 300 kHz to 3.0 GHz, Synethized source with 1 Hz resolution, 2 ind. channels, 60 dB Step Attenuator |
| $24250 | |
| HPC 8714ET
RF Network Analyzer. 300 kHz to 3.0 GHz, -60 to 8 dBm, 1Hz frequency resolution, 0.01 dBm power resolution, Type N (f) connector | $11500 |
| |
| HPC 8714ET/1E1
RF Network Analyzer. 300 kHz to 3.0 GHz, -60 to 8 dBm, 1Hz frequency resolution, 0.01 dBm power resolution, Type N (f) connector. Option 1E1 adds 60 dB/50-Ohm Step Attenuator | $11900 | $19270 | |
| HPC 8720A/10
130 MHz-20 GHz, Complete Vector Network Analyzer, includes swept synthesized source, switching s-parameter test set, 2 display channels, opt 10:Time Domain capability |
| $64000 | |
| HPC 8720B/001
130 MHz-20 GHz, complete Vector Network Analyzer, w/fast sweeping source, switching s-parameter test set & full color display in one package, to 95 dB dynamic range, opt oo1:1 Hz frequency resolution |
| $64500 | |
| HPC 8720D
50 MHz-20 GHz Vector Network Analyzer, built in synthesized frequency source, built in S-Parameter Tets Set, up to 105 dB dynamic Range, Vector receiver/error correction |
| $64770 | |
| HPC 8730A
Tuner Analyzer, 300 KHz-1300 MHz, fast and accurate analyzer system includes 87030A | $4950 | $18500 | |
| HPC 8752C/003
RF Network Analyzer, 300 KHz-3 GHz, includes integrated 1 Hz resolution Synthesized Source and integrated Transmission/Reflection Test Set, to 110 dB of dynamic range |
| $27120 | |
| HPC 8752C/004
RF Network Analyzer, 300 KHz-3 GHz, opt 004:Step Attenuator |
| $24060 | |
| HPC 8753B
Network Analyzer, 300 KHz-3 GHz | $6500 | $25500 | |
| HPC 8753C
RF Network Analyzer, 300 kHz to 3 GHz, 100 dB dynamic range, integrated 1 Hz resolution synthesized source, accuracy +- 10 ppm |
| $26500 | |
| HPC 8753D
RF Network Analyzer, 30 KHz-3 GHz, includes integrated 1 Hz resolution synthesized source and integrated S-Parameter test Set, to 110 dB dynamic range |
| $34500 | |
| HPC 8753D/075
30 kHz – 3 GHz, includes integrated S-Parameter Test Set and integrated signal source, 75-ohm version. |
| $34500 | |
| HPC 8753D/6
Same as above with 6 GHz Frequency extension |
| $39600 | |
| HPC 8753E
RF Network Analyzer, 30 kHz to 3 GHz, integrated S-parameter test set solid-state switching, to 110 dB dynamic range, fast, built-in floppy disk drive. |
| $32250 | |
| HPC 8753E/75
Network Analyzer, 30 kHz to 3/ GHz, 100 dB dynamic range, both frequency and power sweeps. Integrated synthesized source, S-parameter test set, and receiver.VGA output. HPIB. /75=75 Ohm impedance |
| $32250 | |
| HPC 8753ES
RF Network Analyzer. 30 kHz to 3 GHz, -85 to +10 dBm, 50 Ohm, 7 mm test ports |
| $31700 | |
| HPC 8753ES/6
RF Network Analyzer, 30 kHz to 6 GHz, 1 Hz resolution, -85 to 10 dBm, 0.01 dB |
| $36750 | |
| HPC 8757A
Scalar Network Analyzer. 10 MHz to 60 GHz, +16 to -60 dBm, 4 display channels, limit testing, HP-IB |
| $11000 | |
| HPC 8757C
Scalar Network Analyzer. 10 MHz to 110 GHz, +16 to -60 dBm, 3 detector inputs, 2 display channels, ac/dc detection mode, limit testing | $4250 | $9000 | |
| HPC 8757D
Scalar Network Analyzer, 10 MHz to 110 GHz (detector dependent), 4 channels, 75 dB dynamic range, limit testing, external disk save/recall, color display. |
| $10350 | |
| HPC 8757E
Scalar Network Analyzer. 10 MHz to 110 GHz (detector dependent), 3 detector inputs, 2 independent display channels, 75 dB dynamic range, ac/dc detection, monochrome display |
| $8460 | |
| HPC 89440A/AY8
Vector Signal Analyzer, dc to 1.8 GHz, -144 dBm/Hz, scalar/vector modes, full-frequency in spans to 1798 MHz, internal RF source | $3500 | $58160 | |
| HPC 8981B
Vector Modulation Analyzer, 350 MHz I vs. Q bandwidth, 50 MHz to 200 MHz I/Q demodulator. Analyzes coherent phase, amplitude modulation, 12-bit digitizing HPIB. | $6500 | $35000 | |
| HPC R11644A
Mechanical Calibration Kit, For HP 8720 series or HP 8510C network analyzer systems, 26.5 to 40 GHz, WR-28 connector |
| $4455 | |
located to left of the item and click on it to see the image.
