 | DAT 4000A/20/80
DC Voltage Calibrator with Current & Ohms options, 7.5 Digits, 90 day accuracy to 2 ppm |
| $17990 |  |
| DAT 4200/30/80
AC Voltage/Current Calibrator, 6.5 Digits, 1 mV-1 kV, 10 Hz-1 MHz, 90 day accuracy to 60 ppm | $3900 | $22990 | |
| DAT 4200A/10/80
AC Voltage Calibrator, 1 mV-1000V in decades, 100 Hz-1 MHz in decades steps to 90ppm accuracies | $4500 | $18745 | |
| DAT 4700/10/20
Multifunction Calibrator, DCV/ACV/DCI/ACI/Ohms, 7.5 Digits, 90 day accuracy to 4 ppm | $5500 | $17985 | |
| DAT 4708/20/30/80/90
High Accuracy multimeter calibrator for AC voltages up to 8.5 Digits, option 20: AC Voltage to 30 ppm, 100 Hz-1 MHz, option 30: AC current 100 uA-1 A ranges 10 Hz-5 KHz to 70 ppm | $2100 |
| |
| FLU 5100B
Calibrator, AC/DC Volts/mA, Ohms |
|
| |
| FLU 5100B/03/05
Calibrator, AC/DC Volts/mA, Ohms, w/IEEE & wideband AC |
| $14460 | |
| FLU 5101A
Multimeter Calibrator, same as 5100A w/Tapedeck | $2100 |
| |
| FLU 5101B/3/5
Multimeter Calibrator, same as 5100B w/Tapedeck, IEEE & Wideband AC |
| $18150 | |
| FLU 5102B
Military Version of 5100B w/Protective cover | $1950 | $16250 | |
| FLU 5102B/3/5
Same as 5102B w/IEEE & Wideband AC Volts | $2950 |
| |
| FLU 515A
Portable Calibrator, 0-100 VDC, 0-100 VAC, 10 Ohms-10 Megohms, 1 mV-119.9999 VAC | $750 | $5825 | |
| FLU 5200A
AC Calibrator, l1mV-119.99 VAC, .005%, 10 Hz-1 MHz |
| $11450 | |
| FLU 5215A
Amplifier for 5200A/5700A/5100B, up to 1100 VAC, without interface cable |
| $14875 | |
| FLU 5220A
Transconductance Amplifier, Converts Precision Voltage to Precision Current | $1750 | $7050 | |
| FLU 540B
AC Thermal Transfer Std, Opt.110 is battery pack | $975 | $9500 | |
| FLU 5440B
DC Voltage Calibrator, 0-1100 V, High Precision, 2 ppm+5 uV 90 day accuracy, Late Model, Digital readouts. |
| $15100 | |
| FLU 5442A
DC Voltage Calibrator, 0-1100V, 3 ppm accuracy | $2950 | $11850 | |
| FLU 5450A
Resistance Calibrator, 1 Ohm-100 Megohm |
| $5495 | |
| FLU 5500A/SC300
Multi Calibrator, for Multimeters, OÆscopes, Wattmeters, Electronic Thermometers etc., AC/DC volts, milliamps, resistance, capacitance, power, OÆscope voltage/edge/time marks, leveled sinewave |
| $16495 | |
| FLU 5700A
High End Calibrator, 0-1100 VDC, +-220 uV-1100 V AC 10 Hz-1.2 MHz, 1 ohm-100 MOhm, 0-2.2A AC 10 Hz-10 KHz, +-0-2.2A DC, to 5ppm accuracy DC Volts |
| $26950 | |
| FLU 5700A/3
Late Model, high end Calibrator, covers high accuracy DMM calibration workload, AC/DC volts, AC/DC current, Ohms, to 5 ppm DC 90 day accuracy, easy to use |
| $33450 | |
| FLU 720A
Voltage Divider, Ratio Standard, .1PPM Linearity |
| $9500 | |
| FLU 721A
Lead Compensator, 4000:1 Max R Ratio Calibrator |
| $2225 | |
| FLU 732A
DC Reference Standard, 10V/1V/1.018V, 0.5 ppm stability/mo. |
| $3950 | |
| FLU 750A
Reference Divider, .001% of output, 0-1100 V | $495 | $5800 | |
| FLU 752A
Precision Reference Divider, 10:1 & 100:1 ratios, 0.2 ppm accuracy on 10:1, 0.5 ppm on 100:1 | $1750 | $7500 | |
| HPC 105A
Quartz Oscillator, super high stability | $450 | $5000 | |
| HPC 105B
Quartz Oscillator, super high stability, 5 MHz, 1 MHz & 100KHz Outputs, w/battery backup |
| $5800 | |
| HPC 11683A
Range Calibrator for calibrating 435/436/437/438 series Power Meters |
| $2295 | |
| HPC 117A
VLF Comparator, 60 KHz WWVB Receiver, without antenna | $750 |
| |
| HPC 16074A
Calibration Standard, RL Standard for Calibration Bridges, etc. High/Low four terminals BNC. 0/0.1/1/10/100/1K/10K/100K Ohms, short/open, 100 uH/100 mH | $2900 |
| |
| HPC 16380A
Standard Capacitor Set. 1 pF, 10 pF, 100 pF, 1000 pF. +/-0.1% nom. Acc., </- 300 ppm/yr., 4-terminal pair configuration |
| $3570 | |
| HPC 5065A/2
Rubidium Frequency Standard, long term stability, >1x10 to the -11th power per month, 5 MHz/1 MHz/100 KHz. Opt. 2 adds standby battery power | $4950 | $26570 | |
| HPC 5087A/33
Distribution Amp. with single 10 MHz input and 12ea 10 MHz output |
| $6345 | |
| HPC 58503A
GPS Time & Frequency Receiver, < 1x10 to the -12th power frequency accuracy |
| $5706 | |
| HPC 58503B
GPS Time and Frequency Reference Receiver. 8-channel parallel tracking, <1 x 10(-12)/day, SmartClock intelligent holdover mode |
| $5400 | |
| HPC 58509A
GPS Line Amplifier. 750 MHz to 2.4 GHz, >20 dB gain | $250 | $550 | |
| HPC 85060C
Calibration Control Unit, interfaces with 8510B/C, 8719C/D, 8720C/D, 8722C/D, 8753C/D via HPIB. Provides various communication lines & temperature control for ECal module | $1850 | $5100 | |
| TEK 067-0587-02
7000 Series O¦scope Calibrator, to 1 GHz | $750 |
| |
| TEK CG5001
Oscilloscope Calibrator, Programmable, Test Vertical Gain, Horizontal Timing, Bandwidth/Pulse response, < 1.3 ns Probe accuracy & Compensation, Current Probe accuracy, Calibrator output accuracy | $2200 | $14995 | |
| TEK CG551AP
Programmable O¦scope Calibrator, Tests Amplitude, Time Base, Risetime etc. | $1450 | $14995 | |
| TEK PG506
Amplitude Calibrator for O'scope Calibration | $595 | $3050 | |
| TEK SG503
Leveled Sine Wave Generator, for O'scope Calibration. | $595 | $3595 | |
| TEK SG504
Leveled Signal Gen., 245-1050 MHz, for O¦scope Calibration, w/leveling head | $1100 | $5350 | |
| TEK TG501
Time Mark Generator for O'scope Calibration | $550 | $2750 | |
| VSI 2500
AC/DC Current Calibrator, 1 uA-2 Amps, DC accuracy .01%, AC accuracy .05% | $650 | $1295 | |
| VSI 2500E
Current Calibrator, 100 uA-10 A DC or AC to 10 KHz | $750 | $1995 | |
| VSI 2500EN
AC/DC Current Calibrator. High Impedence (10 Megohms), 100 uA to 10A, 1nA to 100uA resolution | $1100 | $2495 | |
| VSI 2500EP
Same as 2500E but Programmable | $950 | $2395 | |
| VSI 2575A
Current Shunt. 300 A | $950 | $1795 | |
| VSI 2701C
DC Voltage/Current Calibrator, 8 PPM, 30 Day Accuracy | $995 | $2995 | |
| VSI 2705
AC Voltage/Phase Standard. 1.2mV to 1200V. Resolution 10nV to 10mV. Microprocessor based, plug-in digital phase control board. 0.1 degree increments from 0° to 360°. | $1950 | $6795 | |
| VSI 2720GS
DC Voltage Source, .0002% DC Accuracy |
| $10995 | |
located to left of the item and click on it to see the image.
